Arri SRH-3 Low Profile Iso Adaptor - B Stock

The Iso adaptor for the SRH-3 head it great, it essentially always is mounted on the head. The one big downside is with the stacked Mitchell mount the head gains so much height greatly reducing the usefulness of such a small remote head in the first place.

This low profile mount replaces the Mitchell receiver on the isolator and attaches the head directly to the iso dampener. In doing so the stack height is reduced by 3.75" to an overall height of ~26".

This allows less torque on the iso dampener for a given payload, as well as making the head more compact.

The best part is, the head is still short enough to fit in the shipping case (though some foam modifications will need to be made.

This adaptor is cnc machined 6061 aluminum, anodized black. It includes six M5x.8 stainless steel bolts with washers. It re-uses the countersunk 3/8" bolts from the iso adaptor.

Installation isn't hard, but can be a bit finicky: expect to take around 10 mins the first time. I do not recommend it be done on set. This item is meant to be a semi-permanent install. I am happy to walk any customers or potential customers through the installation process.

Designed, machined, anodized, and available for pickup in Atlanta, GA.